Metallurgical Characteristics, Compressive Strength, and Chemical Degradation Behavior of Aluminum-Cenosphere Composite Foam Developed by Spray Forming Route

Abstract

In the present study, the microstructural characteristics, compressive strength, and corrosion behavior of aluminum-cenosphere composite foam (CF) developed by spray forming route (processed with 5 Psi (3.45 × 104 N/m2) and 10 Psi (6.90 × 104 N/m2) hydrogen pressure) has been undertaken. The microstructure of the spray-formed coupon consists of hollow cenosphere particles distributed uniformly in aluminum matrix. Compressive yield strength (YS) of the aluminum-cenosphere foam (CF) is different from commercially pure aluminum (cp-Al). It is found that the YS of the foam processed with 5 Psi is 83.62 MPa and for the foam processed at 10 Psi is 113.32 MPa as compared to 104.42 MPa for cp-Al. A detailed study of corrosion behavior through electrochemical measurements indicates that CF exhibits a reduced corrosion rate from 0.092 (for cp-Al) to 0.056 mm/year and 0.080 mm/year for the samples processed with 10 and 5 Psi, respectively. Through a detailed analysis of Nyquist and Bode plots derived from EIS measurements, it is concluded that mostly localized corrosion occurs in all the samples. The post-corrosion microstructural study confirms that interface of aluminum and cenosphere is the potential area for initiation of corrosion.