Abstract
In the present work, attempt has been made to analyse the metallurgical and mechanical characterization of Titanium Carbonitride (TiCN) and Titanium Aluminium Nitride (TiAlN) duplex coatings. TiCN/TiAlN and TiAlN/TiCN bilayer combinations were deposited on cemented carbide cutting insert substrates by means of the cathodic arc physical vapour deposition (CAPVD) process. The metallography analysis revealed a highly densed uniform structure and a fewer voids for the TiAlN/TiCN bilayer coating when compared to TiCN/TiAlN combination. Nano-indentation analysis was performed for the assessment of the surface hardness of the coatings followed by the measurement of adhesive strength through use of a scratch tester. The TiAlN/TiCN bilayer coating revealed a higher hardness and greater adhesion strength than the TiCN/TiAlN bilayer coating. Roughness parameters of the coated films were obtained using atomic force microscopy (AFM). TiAlN/TiCN bilayer coating showed a smooth surface, when compared to TiCN/TiAlN bilayer coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.