Abstract

The Sarsuk polymetallic Au deposit is located in the Devonian volcano-sedimentary Ashele Basin of the Altay Orogenic Belt (AOB), Xinjiang. Mineralization in the deposit is confined to an area of 400m long and 50–120m wide, and occurs as dense massive, banded, disseminated, stockwork, and veinlet ore structures. Exhalative sedimentary, subvolcanic hydrothermal, and supergene periods have been distinguished. Although syn-depositional ores can be found, the main orebodies from this period have been eroded. Thus, the orebodies being mined are hosted mainly in a rhyolite porphyry subvolcanic intrusion within the volcanic conduit of a hydrothermal system. Electron microprobe analysis of the main ore minerals indicates that pyrite is the main Au-bearing mineral. The Au occurs mainly as either inclusions or in fissures in the form of tellurides, and is closely associated with Ag. Zn/Fe ratios of sphalerite vary from 11.37 to 251.36, with an average of 96.65, and the formation temperatures of chlorites are 155–206°C, with an average of 175°C. The compositions of sphalerite and chlorite indicate that the main mineralization occurred in a low- to moderate-temperature environment. Homogenization temperatures of fluid inclusions from ores of the main mineralization stage vary generally from 130°C to 390°C, with peaks at 140°C, 190°C, and 310°C. Their corresponding salinities range from 3.0 to 10.0wt.% NaCl equivalent, with densities from 0.56 to 1.03g/cm3. The main mineralizing fluid of the deposit is characterized by high–low temperatures, moderate–low salinities, and moderate–low densities. The 3He/4He ratios of fluid inclusions in pyrite are 0.02 to 0.44 Ra, and the percentage of mantle-derived He ranges from 0.06% to 7.45%. 40Ar/36Ar ratios range from 319.6 to 458.5, and the percentage of 40Ar* varies from 7.53% to 35.55%. Both fluid characteristics and He and Ar isotope compositions suggest that the ore-forming fluids were a mixture of magmatic fluid and seawater. The CO2-rich fluids in the ores suggest that boiling occurred. The mixing of a high-temperature and high-pressure magmatic fluid with deeply circulating seawater caused a decrease in temperature, and phase separation in the ore-forming fluids. Thus, the precipitation of the most economically important ore materials was the result of this mixing process.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call