Abstract
The severe indoor/outdoor air contamination caused by hazardous particulate matters (PMs) has a devastating impact on the environment and human health. Herein, air filters fabricated from delignified wood aerogels and metal–organic frameworks (MOFs) were used for PM removal. Two specially designed MOFs (i.e. Zn-based ZIF-L and Zr-based UiO-66-NH2) were deposited into a highly porous wood matrix through in situ growth approach. The MOF crystals are attached tightly to the highly available cellulose surface groups and distributed uniformly. The integration of MOFs can regulate the aerogel morphology and surface property, leading to enhanced PM removal performance. Bare wood aerogels beard removal efficiencies of 70.7% and 75.0% for PM2.5 and PM10, with a low-pressure drop of 15 Pa. By contrast, ZIF-L decorated wood aerogels exhibited PM2.5 and PM10 removal efficiencies of 97.6% and 99.5%, respectively, which are ascribed to the increased interception/impaction of PMs with the positively charged ZIF-L layer. While UiO-66-NH2 functionalized wood aerogels demonstrated PM2.5 and PM10 removal efficiencies of 96.4% and 98.9% because of the hierarchical filter matrix and the presence of polar –NH2 groups. Moreover, MOF modified wood aerogels can be easily regenerated and superior reusability can be achieved. This work provides an effective and economic strategy for the preparation of air filters from renewable materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.