Metal contents and size distributions of brake and tire wear particles dispersed in the near-road environment

Abstract

Traffic related non-tailpipe particulate matter emissions can rival the continuously decreasing tailpipe emissions in modern fleets. Non-tailpipe emissions have become the dominating source of traffic emissions in California already. This study measured ambient PM2.5 and PM10 concentrations at near road environments for two major highways in California, I-5 in Anaheim and I-710 in Long Beach. A total of 51 elements were measured from filter samples collected over four-hour intervals for a two-week period in the winter of 2020 before the statewide lockdown by the COVID-19 pandemic. Iron was the most abundant element in ΔPM10 (differences between downwind and upwind sites), contributing to 30 % and 24 % of total measured elements in ΔPM10 at the I-5 and I-710 locations, respectively. Iron correlated highly with other brake wear markers (e.g., titanium, copper, barium, manganese, and zirconium) with coefficient of determination (r2) ranging from 0.67 to 0.90 in both PM2.5 and PM10. Silicon was the second most abundant element, contributing to 21 % of total measured elements in ΔPM2.5 and ΔPM10. Silicon showed strong correlations with crustal elements such as calcium (r2 = 0.90), aluminum (r2 = 0.96), and potassium (r2 = 0.72) in ΔPM2.5, and the correlations were even higher in ΔPM10. Barium had a weak correlation with zinc, a commonly used maker for tire wear, with r2 = 0.63 and r2 = 0.11 for ΔPM10 at the I-5 and I-710 locations respectively. Barium showed a positive correlation with crosswind speed and could serve as a good brake wear PM marker. Hourly PM2.5 concentrations of iron and zinc showed cyclic peaks from 0800 to 1000 h at I-5 during weekdays. Particle mass distributions showed peaks near ~7 μm, while particle number distributions showed peaks near 2.1 μm and 6.5 μm, respectively. This is consistent with brake wear and road dust size ranges previously reported.