Abstract
Abstractinteresting properties of magnetic nanocomposites have attracted attention of both academic and industrial researchers. In this work, thermal, mechanical, morphological, and magnetic properties of polyethylene (PE) nanocomposites were inspected using carbon‐based magnetic fillers (CNi, CCo, and CFe). The melt mixing method was employed to prepare the nanocomposites using small amounts of filler ranging up to 2 wt%. Wood sawdust pyrolysis produces carbonized material activated by Ni, Co, or Fe salts and used as filler. The structural analysis was carried out using Fourier transform infrared spectroscopy indicating that the polymer chemical structure remains unaltered with the filler addition. Thermal stability of nanocomposites as well as the determination of metal amount in the carbon‐based fillers was investigated by thermogravimetric analysis. Filler introduction enhanced the onset and the maximum degradation temperatures up to 11°C and 8°C, respectively. The crystallization and melting temperatures examined by differential scanning calorimetry remained unchanged as compared to neat PE whereas the percent crystallinity was improved up to 8%. The incorporation of the filler leads to the improvement in the elastic modulus of the polymer matrix. The addition of 2.0 wt% of the metal‐carbonized filler in the diamagnetic polymer resulted in a thermoplastic nanocomposite with ferromagnetic behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.