Abstract
Abstract Bulk heterojunction (BHJ) photovoltaic cells (PVCs) have been fabricated with a new active layer architecture by introducing 1-dimensional (1D) multi-walled carbon nanotubes (MWCNTs) and 2-dimensional (2D) reduced graphene oxide (rGO) in Poly[3-hexylthiophene-2,5-diyl] (P3HT): Phenyl-C61-butyric acid methyl ester (PC60BM) blends. The fabricated solar cells revealed a maximum short-circuit current density (Jsc) of ∼11.01 mA/cm2, open-circuit voltage (Voc) of ∼0.63 V and fill factor (FF) of ∼0.5 yielding an efficiency of ∼4.13%. The improved efficiency has been attributed to the efficient exciton dissociation at the junctions formed by CNTs and rGOs in addition to PC60BM with P3HT. The faster electron-transport by PC60BM and hole by CNT/rGO network in the blend that inhibits the carrier recombination contribute significantly towards the improved performance of the fabricated PVCs. The effect of MWCNTs:rGOs network on the mesoscopic phase distribution of P3HT and PC60BM have also been investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.