Abstract
The combustion of ethanol and dimethyl ether (DME) was performed over Pt/ZSM-5 catalyst in a packed-bed reactor to investigate the combustion characteristics and catalyst deactivation. Results showed that the CO2 yield and wall temperature for the combustion of DME were higher than those for the combustion of ethanol. The maximum CO2 yield for both fuels surpassed 72%. After 48h of continuous combustion, CO2 yields of DME and ethanol decreased by 13.8% and 38.9%, respectively, attributed to the agglomeration of Pt and the formation of carbonaceous deposits on the catalyst. Transmission electron microscopy images showed considerable Pt agglomeration after ethanol combustion. Temperature-programmed oxidation results revealed two types of carbonaceous deposits with oxidation temperatures of 225 and 345°C after DME combustion, but only the former type was detected after ethanol combustion. X-ray photoelectron spectra revealed that the mainly increased surface carbonaceous species were CC/CH and OCO after the combustion of ethanol and DME, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
