Mercury porosimetry of ceramics

Abstract

Mercury porosimetry has been used in ceramics for the characterization of products and for studies of processing. Specifications including PSD (pore size distribution by mercury porosimetry) are now applied to magnesia refractories used in basic oxygen furnaces and to building brick which may be exposed to frost. Other products cited as examples are the silica fiber tile used on the space shuttle, plasma sprayed coatings, carbon composites and filters. In ceramic processing research, PSD has proved valuable for evaluating the firing of basic refractories, brick and sanitary ware. Pore growth during the early stages of sintering several materials was first identified by PSD. The character of clay agglomerates and the presence of alumina aggregates in compacts have been measured, the latter showing bimodal PSD. The progressive change in PSD while compacting glass spheres outlines the stages of compaction. The most frequent pore diameter in plaster slip casting molds correlates directly with plaster consistency. In dense or vitrified ceramics, errors may occur due to closed pores or pores with narrow openings. However, in ceramic compacts and highly porous ceramics, pores have several openings so PSD is a realistic measure of structure.