Abstract
Energy harvesters offer an attractive power source alternative in particular for the next generation of mobile sensor applications. The current work investigates the power output of bulk micromachined 3 mm $\times2$ mm $\times50\,\,\mu \text{m}$ sized cantilever-type piezoelectric (2 $\mu \text{m}$ AlScN) energy harvesting device that is magnetically driven by miniaturized NdFeB permanent magnets attached to the free-end of the cantilevers. A novel energy harvester and one potential application is introduced. Properties and relevant figures-of-merit for AlScN in comparison to AlN are discussed on device level. Magnetic properties of the permanent magnet are summarized. The influences of the electrode area coverage, applied external magnetic field as well as fatigue properties of the harvesters are investigated. FEA results of the harvester’s magnetic interactions are presented. Finally the suitability of a coil in comparison to a piezoelectric energy harvester is evaluated. A maximum peak power of 15.6 $\mu \text{W}$ is obtained from a 2 mm wide cantilever with 2 mm long top electrode when driven under an homogeneous external field of magnitude $\text{B}_{\mathrm {AC}} = 1$ G at resonance $f_{\mathrm {res}} = 3240$ Hz. The maximum power density is calculated as 15.8 mW/cm3 (2.6 W/m2) when applying the optimal load impedance approximately 117 $\text{k}\Omega $ . [2019-0059]
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
