Membrane processes for effective methanol synthesis in the forest based biorefinery

Abstract

ZSM-5 membranes were prepared and their performance for methanol separations from synthesis gas was evaluated. The experimentally observed permeances at room temperature for the ZSM-5 membranes were 0.3, 1, 12 and 18 × 10 −7 mol m −2 s −1 Pa −1 for H 2, CO 2, CH 3OH and H 2O, respectively, which resulted in a separation factor α methanol/H 2 of about 30. For a stoichiometric feed, the one pass CO x -conversion for a traditional methanol process is about 26% per pass, which requires a recirculation loop with the associated disadvantages. By assuming that the same membrane performance could be obtained at industrial conditions, it was shown by mathematical modeling that a ZSM-5 membrane reactor could reach 97% CO x -conversion per pass, while a ZSM-5 membrane module process could reach 81% conversion per pass for a stoichiometric feed. As a result of the high conversion per pass for the membrane processes, one pass design with the associated advantages is possible for these processes. A membrane module based system is preferable over a membrane reactor of practical reasons. However, similar performance to the membrane processes can of course be achieved with a one pass process comprised of a series of methanol reactors, reactor effluent heat exchangers, coolers and condensers.