Abstract
The objective of this work is to study at lab-scale the efficiency of a hybrid process coupling ultrafiltration (UF) and adsorption as a pretreatment before seawater reverse osmosis desalination (SWRO). Powdered activated carbon (PAC) and bentonite were used as adsorbents. Actual seawater from Mediterranean Sea was filtered by regenerated cellulose membrane of molecular weight cut-off 30 kDa. The PAC addition allows a decrease of UF fouling rate and an increase of the natural organic matter (NOM) removal, especially for a PAC concentration of 200 mg L-1. An increase of contact time between PAC and seawater induces a reduction of fouling rate. When the contact time increases, the contribution to NOM removal due to PAC adsorption becomes more signifi cant compared to that due to UF alone. Concerning studies with bentonite, the UF fouling rate depends on the bentonite concentration. Addition of more than 500 mg L-1 bentonite can decrease the fouling rate in comparison to ultrafiltration without bentonite. Bu...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
