Membrane fouling caused by amino acid and calcium during bipolar membrane electrodialysis

Abstract

AbstractBACKGROUND: Bipolar membrane electrodialysis (BMED) has been widely applied in the recovery/production of organic acids and in the treatment of wastewater containing ammonium sulfate, sodium nitrate, sodium acetate and ammonium nitrate. However, membrane fouling is still one of the major problems in the electrodialysis process. Since calcium and amino acid are present naturally in fermentation wastewater, this study was carried out to determine the effects of calcium and amino acid on membrane fouling when simulated fermentation wastewater containing ammonium sulfate was treated by BMED.RESULTS: Calcium formed a scale on the cation exchange membrane (CEM) surface in contact with the base cell, but this had no significant adverse effect on the BMED performance. Amino acid, however, caused CEM fouling of the inner membrane, which hampered the BMED process. The coexistence of calcium and amino acid aggravated the membrane fouling, as observed morphologically on the CEM surface on the base cell side. Elemental mapping analysis showed that the membrane foulant was composed of calcium hydroxide and amino acid.CONCLUSION: The CEM fouling caused by calcium and that due to amino acid, which were distributed differently on the membrane, had different effects on the BMED performance. The coexistence of amino acid and calcium deteriorated the CEM fouling during BMED. Copyright © 2008 Society of Chemical Industry