Abstract
The melting/crystallization behavior and isothermal crystallization kinetics of polypropylene (PP)/metallocene-catalyzed linear low density polyethylene (mLLDPE) blends were studied with differential scanning calorimetry (DSC). The results showed that PP and mLLDPE are partially miscible and interactions mainly exist between the mLLDPE chains and the PE segments in PP molecules. The isothermal crystallization kinetics of the blends was described with the Avrami equation. Values of the Avrami exponent indicated that crystallization nucleation of the blends is heterogeneous, the growth of spherulites is almost three-dimensional, and the crystallization mechanism of PP is not affected much by mLLDPE. The Avrami exponents of the blends are higher than that of pure PP, showing that the mLLDPE helps PP to form perfect spherulites. The crystallization rates of PP are decreased by mLLDPE because the crystallization temperature of PP was decreased by addition of mLLDPE and consequently the supercooling of the PP was correspondingly lower. The crystallization activation energy was estimated by the Friedman equation, and the result showed that the activation energy increased by a small degree by addition of mLLDPE, but changed little with increasing content of mLLDPE in the blends. The nucleation constant (Kg) was determined by the Hoffman–Lauritzen theory.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.