Abstract
This paper aims to investigate the elasticity, strength and failure of aluminum (Al) nanocomposites with holey-graphene (hG), which were melted and recrystallized. Five nanocomposites (Al-graphene and four Al-hG - two of them doped, with nitrogen and boron) were studied by molecular dynamics simulations. They were melted and subsequently recrystallized at a fixed cooling rate of 0.25 K/ps. The nucleation temperature of nanocomposites was increased by 300–200 K compared to pure aluminum. The Al crystallization in the nanocomposites was about 85 % (97 % for pure Al). The nanocomposites with undoped nanofillers showed an increase in Young's modulus between 15 and 27 % relative to pure Al, while doped nanofillers showed no improvement. The mechanical properties of the nanocomposites depended on the characteristics of the nanofillers, namely (i) the porosity, (ii) the percentage of recrystallization of the Al matrix, and (iii) the interfacial adhesion in the interface Al-nanofillers. The results show that undoped nanofillers have much higher Young’s modulus and lower porosity compared to the doped nanofillers (N-hG and B-hG). Finally, the application of the inverse rule of mixtures to extract the Young’s modulus of the nanocomposite was successful.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
