Abstract
The nanometer calcium carbonate filled Polyformaldehyde/ethylene-vinyl acetate copolymer/high-density polyethylene (HDPE) composites were prepared using a twin-screw extruder. The effects of load and temperature on the melt volume flow rate (MVR) and melt density (ρ m ) of the composites were investigated by using a melt flow rate instrument under experimental conditions with temperatures range from 170 to 220°C and loads varying from 1.2 to 12.5 kg. The results showed that the MVR of the composites increased with an increase of temperature and load, while reduced with an increase of the weight fraction (φ) of the HDPE, and the relationship between the MVR and φ was almost consistent with a linear law function. The melt density of the composites increased nonlinearly with an increase of load, while decreased with a rise of temperature. Moreover, the ρ m of the composites decreased with increases in φ.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
