Melt convection effects on the critical velocity of particle engulfment

Abstract

Liquid convection ahead of the solidifying interface alters particle behavior in the vicinity of the interface. This effect has not been quantified to date. Relevant directional solidification experiments were conducted using samples of varying thicknesses, as well as normal and low-gravity experiments. A mixture of transparent biphenyl matrix and spherical glass particles, as well as one of succinonitrile matrix with polystyrene particles were used. Two experimental setups were used: a horizontal gradient heating facility (HGF) for horizontal solidification, and a Bridgman-type furnace (BF) for vertical solidification. The convection level during solidification in the HGF was varied by changing the distance between the glass slides containing the composite sample. The BF was used on ground and during parabolic flights, and thus the convection level was changed by alternating low-gravity and high-gravity solidified regions. It was found that the convection level and/or particle buoyancy significantly influences the critical velocity for particle engulfment. At higher natural convection during solidification the critical velocity increases by up to 40%. At very high convection levels engulfment may become impossible because particles fail to interact with the interface. A systematic analysis of some theoretical models was performed in an attempt to evaluate the present level of theoretical understanding of the problem. Methods of evaluating the surface energies required for model validation are also presented.