Abstract
An analytical procedure has been developed for the separation of Cu(II), Ni(II), Co(II), Fe(II), Pd(II), Th(IV), V(IV), and determination of Fe(II), Co(II), Ni(II), and V(IV) by MEKC after chelation with bis(salicylaldehyde)tetramethylethylenediimine (H(2)SA(2)Ten). Uncoated fused silica capillary was used with an applied voltage of 30 kV with photo-diode array detection at 228 nm. SDS was added as micellar medium at pH 8.2 with sodium tetraborate buffer (0.1 M). Linear calibrations were established within 0.015-1000 microg/mL of each element with LOD within 5-67 ng/mL. The method was applied for the determination of vanadium from crude oil and ore samples in the range 0.34-2.40 and 114.2-720.7 microg/g with RSD 1.7-3.8 and 0.98-2.30% (n = 3), respectively. Fe, Ni, and Co present in crude oil and ore samples were also determined with RSD 1.3-2.8, 1.1-4.1, and 1.2-3.5% (n = 3), respectively. The results were compared with that of supplier's specifications and atomic absorption spectrometry (AAS). Method was evaluated by standard addition technique.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
