Medium oxygen enriched blast furnace with top gas recycling strategy

Abstract

Top gas recycling oxygen blast furnace (TGR-OBF) process is a promising ironmaking process. The biggest challenge of the TGR-OBF in operation is the dramatic decrease of top gas volume (per ton hot metal), which once led to hanging-up and shutdowns in practice of the Toulachermet. In order to avoid this weakness, the strategy of medium oxygen blast furnace was presented. The maneuverable zone of the TGR-OBF was determined by the top gas volume, which should not be far from the data of the traditional blast furnace. The deviation of ±12.5% was used, and then the maneuverable blast oxygen content is from 0.30 to 0.47 according to the calculation. The flame temperature and the top gas volume have no much difference compared to those of the traditional blast furnace. The minimum carbon consumption of 357 kg per ton hot metal in the maneuverable zone occurs at the oxygen content of 0.30 (fuel saving of 14%). In the unsteady evolution, the N2 accumulation could approach nearly zero after the recycling reached 6 times. Thus far, some TGR-OBF industrial trials have been carried out in different countries, but the method of medium oxygen enriched TGR-OBF has not been implemented, because the accumulation of N2 was worried about. The presented strategy of medium oxygen enriched TGR-OBF is applicable and the strategy with good operational performance is strongly suggested as a forerunner of the full oxygen blast furnace.