Abstract

BackgroundMedical professionals are constantly exposed to bodily fluids and sanitizing agents during routine medical procedures. Unbeknownst to many healthcare workers, however, the barrier integrity of medical gloves can be altered when exposed to these substances, potentially resulting in exposure to dangerous pathogens.MethodsThis experimental study was designed to test the hypothesis that the durability of both natural and synthetic solvent-exposed medical gloves will be lower than the durability of the gloves in air. The testing consisted of a sample of commercially available medical gloves exposed to 70% ethanol, phosphate buffered saline, and deionized water, aimed at simulating the environments in which medical gloves are commonly worn. Gloves were included in this study based on their performance in previous durability studies in air. Data were collected over a period of three months. The glove assessment device automatically detects pinhole-sized perforations in medical gloves, eliminating the need to visually inspect each glove. Relative durability was measured as the average number of sandpaper touches until glove puncture.ResultsFour out of five glove brands performed better when exposed to all three solvents than in air, which is likely due to slippage in the interface between the wet glove and the sandpaper. Sensicare Micro, a polyisoprene surgical glove, had the most consistent durability in all three solvents tested. A two-way ANOVA revealed that both glove brand (P = 0.0001), solvent (P = 0.0001), and their interaction (P = 0.0040, α = 0.05) significantly affected average glove durability.ConclusionsGlove durability did not remain consistent in 70% ethanol, phosphate buffered saline, deionized water, and air. These results make it clear that additional testing and labeling information would help healthcare workers select gloves for use in specific environments to ensure the best barrier protection against disease or toxins.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call