Mechanochemical Synthesis of High-Entropy Perovskite toward Highly Sensitive and Stable X-ray Flat-Panel Detectors.

Abstract

Perovskites are attracting attention for optoelectronic devices. Despite their promise, the large-scale synthesis of perovskite materials with exact stoichiometry, especially high-entropy perovskites, has been a major challenge. Moreover, the difficulty in stoichiometry control also hinders the development of perovskite X-ray flat-panel detectors. Previous reports all employed simple MAPbI3 as the active layer, while the performance still falls short of optimized single-crystal-based single-pixel detectors. Herein, a scalable and universal strategy of a mechanochemical method is adopted to synthesize stoichiometric high-entropy perovskite powders with high quality and high quantity (>1kg per batch). By utilizing these stoichiometric perovskites, the first FA0.9 MA0.05 Cs0.05 Pb(I0.9 Br0.1 )3 -based X-ray flat-panel detector with low trap density and large mobility-lifetime product (7.5 × 10-3 cm2 V-1 ) is reported. The assembled panel detector exhibits close-to-single-crystal performance (high sensitivity of 2.1 × 104 µC Gyair -1 cm-2 andultralow detection limit of 1.25 nGyair s-1 ), high spatial resolution of 0.46 lp/pixel, as well as excellent thermal robustness under industrial standards. The high performance in the high-entropy perovskite-based X-ray FPDs has the potential to facilitate the development of new-generationX-ray-detection systems.