Abstract
The revival of coppice management is being considered as one option to satisfy the increasing market demand for wood biomass. Commonly used harvesting systems in coppice forests (CF) are based on motor manual felling, but further mechanization of CF operations is desirable because of increasing labor costs and the high fatality rates associated with motor manual felling.The goal of this study was to determine the machine performance in terms of productivity, cost-effectiveness and cut quality of new feller-bunchers, when used on different types of CF. The study comprised of five tests on different sites in Italy, four of which represented a specific type of CF.Results showed that harvesting productivity varied from 3.1 to 8.6 dry t per scheduled machine hour (SMH) in multi-stem coppice stands (4.5–16 dry m3 SMH−1). Productivity reached 16.2 dry t SMH−1 in a short rotation forestry (SRF) control stand (39.4 dry m3 SMH−1) and it increased with stump mass. Recorded productivities tested in conventional CF were not as high as achieved in single-stem SRF, or in the mechanized felling of comparable softwood stands, but still matched the requirements of commercial mechanized logging. Costs varied between 3.57 and 20.56 € dry t−1 (1.47–14.17 € dry m3−1). Lowest costs were reached in the SRF stand and highest cost in the Mediterranean CF growing on moderate to steep terrain. Shear heads produced poor cuts and single-action shears performed worst. The disc saw produced very low cuts with low damage levels, which might be acceptable even under current cut quality specifications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.