Abstract
Abstract Axle load distribution factors (ALDFs) are used as one of the primary traffic data inputs for mechanistic-empirical (ME) pavement design methods for predicting the impact of varying traffic loads on pavement performance with a higher degree of accuracy than empirical methods that are solely based on equivalent single axle load (ESAL) concept. Ideally, to ensure optimal pavement structural design, site-specific traffic load spectra data—generated from weigh-in-motion (WIM) systems—should be used during the pavement design process. However, because of the limited number of available permanent WIM stations (in Texas, for example), it is not feasible to generate a statewide ALDFs database for each highway or project from permanent WIM data. In this study, two possible alternative methods, namely, the direct measurement using a portable WIM system and the cluster analysis technique, were explored for generating site-specific ME-compatible traffic data for a highway test section, namely, state highway (SH) 7 in Bryan District (Texas). The traffic data were then used for estimating pavement performance using a ME pavement design software, namely, the Texas Mechanistic-Empirical Thickness Design System (TxME). The TxME-predicted pavement performance (e.g., rutting) using the portable WIM-generated traffic input parameters closely matched with the actual field performance. Overall, the study findings indicated that the portable WIM (with proper installation and calibration) constitutes an effective means for rapidly collecting reliable site-specific ME-compatible traffic data.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
