Mechanistic study of chemical looping partial oxidation of methane over Ce2(SO4)3/MgO with CoO modification

Abstract

Listen

Translate article

Chemical looping partial oxidation of methane (CLPOM) to syngas provides an exceptional opportunity for methane utilization. However, it is still urgent to obtain efficient oxygen carrier (OC) and clarify its microscopic mechanism. In this work, CoO and MgO modified Ce2(SO4)3 OC are optimized based on various preparation methods and different CoO and Ce2(SO4)3 doping amount. Considering the conversion rate (XCH4), selectivities of CO (SCO) and H2 (SH2), H2/CO molar ratio, when the doping amount of CoO, Ce2(SO4)3 and MgO is 20 wt%, 30 wt% and 50 wt% respectively, the OC prepared by mechanical ball milling method has a better thermodynamic and kinetic properties in chemical looping reaction. Compared with literature, this OC has a larger XCH4. In multiple cycles, XCH4 is still higher than 90%, SCO and SH2 remain above 95%. Density functional theory calculation reveal that the Co doping reduces the energy barrier (Eb) of rate-limiting step by 24.3% and lowers the migration Eb of lattice oxygen by 78.2%. The OC with oxygen vacancy can further reduce the Eb of rate-limiting step, but the Eb basically remains unchanged when the oxygen vacancy (Ov) concentration is greater than 1.96%. Because of the high Eb of CO2 formation and low Eb of syngas formation, the syngas demonstrates high selectivity and does not produce CO2 in experiment. Meanwhile, the doping of CoO and MgO reduces carbon deposition, refines the nano-particles of OC, increases the specific surface area (SSA), and enhances resistance to sintering and aggregation. The unique pore structure also provides a favorable microenvironment for the reaction. These findings demonstrate that CoO and MgO modified Ce2(SO4)3 OC have the potential for application in CLPOM, and these basic insights can also be applied to other chemical looping systems.