Mechanistic investigation on Ce addition in tuning recrystallization behavior and mechanical property of Mg alloy

Abstract

Constructing bimodal grain structure is a promising approach to achieve the high strength-ductility synergy in Mg alloy. Formation of bimodal grain is closely related to the dynamic and/or static recrystallization process, which has not been fully understood in the typical Mg-RE based alloy. In this work, it is claimed for the first time that the minor Ce addition (∼0.3 wt%) into Mg matrix significantly promotes the pyramidal <c+a> and non-basal <a> dislocations at the early stage of extrusion, which consequently enhances the formation of sub-grain boundaries via the movement and recovery of pyramidal II-type <c+a> dislocations. At this stage, fine sub-grain lamellae are widely observed predominantly due to the low migration rate of sub-grain boundary caused by the limited mobility of <c+a> dislocations. At the later stage, the sub-grains continuously transform into dynamic recrystallized (DRXed) grains that have 〈101¯0〉 Taylor axis and also strong fiber texture, indicating substantial activation of pyramidal II-type <c+a> dislocation. The low mobility of <c+a> dislocations, accompanied with the solute drag from grain boundary (GB) segregation and pinning from nano-phases, cause a sluggish DRX process and thus a bimodal microstructure with ultra-fined DRXed grains, ∼0.51 µm. The resultant texture hardening and grain refinement hardening effects, originated from bimodal microstructure, result in a yield strength of ∼352 MPa, which is exceptional in Mg-Ce dilute alloy. This work clarifies the critical role of Ce addition in tuning recrystallization behavior and mechanical property of magnesium, and can also shed light on designing the other high-performance Mg alloys.