7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1016/j.ijimpeng.2016.02.010
Copy DOIPublication Date: Mar 8, 2016 | |
Citations: 65 | License type: publisher-specific-oa |
A number of mechanisms have been proposed for the penetration of laminates comprising ultra-high molecular weight polyethylene (UHMWPE) fibres in a polymeric matrix. Two-dimensional ballistic experiments are conducted in order to directly observe the transient deformation and failure processes occurring immediately under the projectile via high-speed photography. Two sets of experiments were conducted on [0°/90°]n laminate beams. First, back-supported and free-standing beams were impacted by cuboidal projectiles of varying mass and fixed geometry. The observations indicate that in both cases, failure occurs in a progressive manner, with plies first failing immediately under the impact zone. The dynamic failure mode is qualitatively similar to that in a quasi-static indentation tests, and attributed to tensile ply failure by the generation of indirect tension within the plies. Direct membrane stretching is ruled out as failure that occurred with negligible beam deflection. In the second set of experiments, the projectile mass was kept constant and its width varied. No dependence of the projectile width was observed in either quasi-static indentation or dynamic penetration tests. This strongly suggests that failure is not governed by a shear process at the edge of the projectile. The observations presented here therefore suggest that tensile ply failure by indirect tension rather than membrane stretching or shear failure at the edges of the projectile is the dominant penetration mechanism in UHMWPE laminates.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.