Abstract
In this paper, experimental studies using a true triaxial apparatus and a bender element system, and numerical simulations based on the discrete element method (DEM) were used to investigate the stress- and fabric-induced shear-stiffness anisotropy in soils at small strains. Verified by experiments and DEM simulations, the shear modulus was found to be relatively independent of the out-of-plane stress component, which can be revealed by the indistinctive change in the contact normal distribution and the normal contact forces on that plane in the DEM simulations. Simulation and experimental results also demonstrated that the shear modulus is equally contributed by the two principal stress components on the associated shearing planes. Fabric-induced stiffness anisotropy, i.e., the highest G and subscript xy or G and subscript hh, can be explained by simulation findings in which more contact normals prefer to distribute along the horizontal direction. The experiments and simulations also reveal that the fabric-induced stiffness anisotropy increases with an increasing aspect ratio of the particles. The assumption of transversely isotropic fabric in soils is valid based on the DEM simulation results; however, this assumption is not completely supported by the experimental results.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Geotechnical and Geoenvironmental Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
