Abstract
Hollow fiber membrane morphology and inner surface structure were analyzed based on the thermodynamic and kinetics of the phase inversion process. Different nonsolvent mixtures formed by N,N-dimethyl acetamide (DMAC) and distilled water were considered. By means of Hansen solubility parameters, lower interaction between the nonsolvent and the mixed solvent (DMAC/trimethyl phosphate, TMP) was observed when greater amount of DMAC was added in the nonsolvent. The spinning solution became thermodynamically more stable and kinetically showed slower coagulation rates, being both related to the resultant membrane formation. In this first study poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) hollow fiber membranes were prepared by the dry/wet spinning technique employing the above cited nonsolvent mixtures as an internal coagulant. Their effect on the internal structure of the membrane evolved towards a more open-porous inner surface when increasing the solvent content in the bore liquid. Various characterization techniques were used in order to analyze the adequacy of these membranes for desalination by direct contact membrane distillation (DCMD). It was found that all the properties together with the permeability of the hollow fibers improved when the coagulation power of the nonsolvent was reduced.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.