Abstract
AbstractTransdermal drug delivery using dissolving microneedles (DMNs) is promising due to increased patient compliance and safety. This article presents a comprehensive simulation and experimental analysis of DMNs with varying tip and base diameters and polymers. The objective of the simulation study is to identify the optimal tip and base diameter of DMNs, as well as the most suitable polymer, for achieving maximum penetration depth. The simulation results showed that the compound consisting of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) in a ratio of 2:1, with a tip radius of 17.5 μm and a base radius of 150 μm, achieved the deepest penetration among the different types of polymers investigated (including PVA, hyaluronic acid (HA), and PVA/PVP in ratios of 1:1 and 1:2). In addition, mechanical and skin penetration experiments were performed on PVA/PVP 2:1 DMNs with varying concentrations of 4, 7, 10, and 15% w/w to determine the optimal polymer concentration. The results of this study indicated that the optimal composition, considering the viscosity of the polymer solution and the simplicity of filling the silicone negative molds, is a PVA/PVP 2:1 with a concentration of 7% w/w.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
