Abstract
While externally bonded fiber-reinforced polymer reinforcing has become an accepted technology for the flexural strengthening of reinforced concrete members, less information is available on flexural strengthening using mechanically fastened FRP (MF-FRP). This study presents the development of a vacuum-infused, hybrid glass–carbon MF-FRP system for the flexural strengthening of reinforced concrete beams. Two different FRP fabric architectures were considered to assess the impact of fiber orientation on behavior. The resistance of the MF-FRP composite strips to freeze–thaw cycling and saltwater submersion was assessed with single-fastener tension–bearing testing. Test results indicate that the MF-FRP system should display adequate residual capacity in typical cold-climate bridge applications. The flexural strengthening capabilities of MF-FRP composite strips were evaluated using four-point bending tests of MF-FRP-strengthened, steel-reinforced concrete beams and non-strengthened beams. The flexural test results for two glass–carbon MF-FRP reinforcing systems show an average increase in ultimate capacity of nearly 50% with good ductility. Flexural fatigue testing was conducted on four MF-FRP reinforced specimens. The cyclic flexural test results indicate that the strength gains that can be realized with the MF-FRP systems used here may be limited by fatigue performance, and that fatigue is an area that warrants further study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.