Abstract

The orientation distribution of mechanically twinned jadeite crystals in a metagranite from the Sesia Zone, Western Alps, is evaluated to derive the orientation of the principal stress directions for a prominent stage of ductile deformation at ca. 300 to 350 °C that has been interpreted to reflect synseismic loading and postseismic creep by Kuster and Stockhert (1999). It is tested whether the orientation distribution can be used to obtain information on the magnitude of differential stress if the critical shear stress for twinning is known. Assuming that the critical shear stress of 140 MPa determined by Kolle and Blacic (1982) for mechanical twinning of clinopyroxene in the (100) [001] system holds true for jadeite, and assuming a homogeneous stress field as a first approximation, differential stresses of the order of 1–2 GPa are inferred for metagranites with ca. 15% jadeite, and of 0.5 GPa for jadeitite with 80% of jadeite. Notwithstanding the uncertainty for the critical resolved shear stress for jadeite, these unexpectedly high values are suspected to be due to a combination of the following effects: (1) an inhomogeneous stress field in the polyphase material with curved stress trajectories, (2) stress concentration in jadeite due to load transfer from the quartz matrix, and (3) minor reorientation of the jadeite crystals in the flowing quartz matrix. Hence, absolute values of differential stress cannot be derived from the orientation distribution of twinned jadeite in polyphase rocks. Notwithstanding the failure in deriving reliable absolute values, a short period with exceptionally high stress must have occurred, and is fully consistent with the microstructural record of other minerals. It is proposed that the mechanical twinning of jadeite was caused by a short-lived stress peak and flow at laboratory strain rates related to quasi-instantaneous loading of the uppermost level of the ductile lower crust during brittle failure of the brittle upper crust in a major seismic event.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call