Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water

Abstract

The study reports mechanical performance of the recycled glass fibres produced from a water-based solvolysis technology, known as the hydrolysis process. The chemical reaction was carried out using sub-critical water to dissolve polyester resin and recover the glass fibres from composites. The effect of temperatures, times, catalyst and water amount on mechanical properties of the recovered glass fibres were investigated. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and time-of flight secondary ion mass spectroscopy (ToF-SIMS) analyses were also employed to examine the fibre surface associated with the polyester resin eliminated level after the hydrolysis reaction. The results revealed that by carefully adjusting the hydrolysis parameters the tensile strength and failure strain of the recycled fibres decrease by approximately 40–70% in comparison with virgin fibres while Young’s moduli remain similar. The relationship between the hydrolysis conditions, recovered fibres and mechanical performance was discussed in this study.