Abstract
Building materials can enable the recycling of sewage sludge from tannery wastewater treatment by infiltration/percolation over coal and clay waste. The process avoids energy-intensive operations and yields a stable and environmentally friendly product. The sludge under study is mainly composed of SiO2, CaO, Al2O3, and Fe2O3, which is convenient to replace the mortar in cement. Different mortars were made by substituting a variable amount of sludge, from 0 to 30%, into the standard cement. The microstructure and mechanical properties of the mortar specimens were characterized after curing for 7 days and 28 days. The best properties were obtained with 15% sludge. Above 15%, the strength decreases at an early stage, as confirmed by SEM and XRD analysis, with more voids and ettringites at larger sludge content. The leaching tests of the mortar confirm that the cumulative values of heavy metals are far below the Deutsch regulatory limits (NEN 7043), justifying retention of the metals in the matrix. Radiological assessment of the sludge mortars also confirms their safety with the values of naturally occurring radioactive materials, surface radon exhalation and annual effective dose far below the required limits. The study suggests that 15% sludge can be used to sustainably replace cement and meet building safety requirement standards.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have