Abstract
AbstractA series of epoxy resin (EP) composites were prepared using ground pearl shell powders, which had been calcined at various temperatures. The EP composite containing ∼ 3% weight content of the calcined pearl shell powder had the highest impact strength and the presence of silane agent was found to be essential for the composite formulation. The impact strengths of the resultant EP composites were highly influenced by the specific surface area, surface morphological structure, and chemical composition of the calcined pearl shell powder. The highest mechanical improvement was obtained for the EP composite prepared with the pearl shell powder calcined at 700°C for 3 h. The layered biopolymeric materials were completely degraded for the pearl shell powder calcined at 700°C, resulting in “sponge‐like” or “net‐like” porous calcium carbonate powder. However, the degradation of the layered biopolymeric materials was not complete for the calcinations at lower temperatures (<600°C), while calcium carbonate decomposed to form calcium oxide at higher temperatures (>800°C). The mechanical improvements of the processed EP composites have been discussed along with the chemical compositions and surface microstructures of the incorporated pearl shell powders. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have