Abstract
Each year, China produces a substantial amount of municipal sludge, industrial waste (slag, fly ash, and desulfurized gypsum), and construction waste, while its recycling rate is low. If not disposed in a properly and timely manner, this inequity can have serious environmental impacts. This study aimed to prepare a new type of modified sludge material with high strength, low shrinkage, and low permeability by curing municipal sludge with industrial waste (slag, desulfurized gypsum, and fly ash) and powdered construction waste. At specific maintenance ages, the modified sludge material was examined for shrinkage deformation, water content, compressive strength, and hydraulic conductivity. The modified sludge material was also tested by scanning electron microscopy (SEM + EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) tests. The hydration products, micromorphology, and elemental composition of modified sludge were also analyzed at specific maintenance ages. These analyses revealed the mechanism of solidification of municipal sludge by industrial waste and powdered construction waste and the changes in the microstructure of the sludge. The results showed that the compressive strength of the modified sludge ranged from 3.83 to 8.63 MPa, volumetric shrinkage ranged from 2.12 to 12.68%, and hydraulic conductivity ranged from 1.65 × 10−8 to 2.21 × 10−7 cm/s after 28 d of maintenance. The active substances, such as SiO2, Al2O3, and CaO, in the industrial waste, powdered construction waste, and municipal sludge were subjected to a hydration reaction in an alkaline environment to produce dense blocks, agglomerates of C-S-H, ettringite, gismondine, and other hydration products. The compressive strength of the modified sludge increased, and its internal structure was dense.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have