Mechanical responses and deformation mechanisms in the AZ31 magnesium alloy during cyclic bending

Abstract

Cyclic loading behavior, such as cyclic bending, is unavoidably involved in various forming processes and the service of end products. Understanding the mechanical behavior of magnesium (Mg) alloys under cyclic bending is essential for promoting their application. Despite existing research, the microscopic mechanisms at play during cyclic bending, specifically the slip and twinning-de-twinning (TDT), warrant further exploration, which is the innovative focus of our study. To address this need, cyclic bending tests were performed on an extruded AZ31 Mg plate with the in-situ digital-image-correlation (DIC) technology. And the texture evolution was determined through electro backscattered diffraction (EBSD) measurements. Concurrently, the crystal-plasticity-based bending-specific approach, EVPSC-BEND, incorporating the TDT scheme, is utilized to interpret the mechanisms involved in cyclic bending. The impact at the macroscopic level is manifested in asymmetric cyclic moment-curvature curves, stress-strain distribution, and shifting of the neutral layer. The developed textures at different regions of the beam and the twin volume fraction distribution further directly illustrate twinning-de-twinning behaviors. Particularly, the upper and lower halves of the beam experience very distinct cyclic behaviors simultaneously. The upper half experiences a twinning, detwinning, and twinning cycle, while the lower half experiences a twin-free, twinning, and detwinning cycle. Additionally, through modeling the cyclic bending with different initial textures, the strong texture dependence has been revealed. The behaviors of magnesium alloy beam under cyclic bending discovered in this work can shed light on the application of Mg alloys, such as forming processes and service of end product.