Abstract
PurposeThe purpose of this paper is to evaluate the mechanical properties of nano‐silver paste sintered lap shear structures and to discuss the effects of loading rate and ambient temperature on shear strength and fracture mechanism.Design/methodology/approachSingle lap shear joints with an area of 2 mm2 and thickness of 50 μm were fabricated by joining two copper substrates with nano‐silver paste. The lap shear tests were carried out under strain control mode on a micro uniaxial fatigue testing system with four loading rates and temperatures. The fracture sections were analyzed by SEM observation to determine the effect of temperature on the fracture mechanism.FindingsResults from the study highlighted that the shear strain rate and temperature can have a significant impact on the shear behaviour of nano‐silver paste sintered lap shear joints. The shear strength increased with shear strain rate, but decreased with increasing ambient temperature. The lap shear joints displayed excellent ductility at higher temperatures due to the grain plastic flow.Originality/valueSo far, the investigation of the mechanical behaviour of low‐temperature sintered nano‐silver paste was restricted to a film form. No work had been done on nano‐silver paste connected structures. The findings presented in this paper give a basic understanding of the mechanical properties of nano‐silver sintered joints when sheared under different loading rates and temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
