Abstract
To reduce the residual stress and improve the fatigue property of the laser weldment by using the stress self-accommodation characteristic of Fe-Mn-Si shape memory alloys (SMAs), a Fe15Mn5Si12Cr6Ni memory alloy welding seam was formed inside 304 stainless steel by laser welding with filler powder. The combination of the hole-drilling method and the ANSYS software was used to research the distribution law of residual stress inside the laser welding specimen. The fatigue strength of the laser welded specimens with the Fe-Mn-Si SMAs welding seam (experimental materials) and 304 stainless steel welding seam (comparative materials) was measured by cycle bending fatigue test. The microhardness of the welding specimens was measured by the microhardness tester. The thermodynamic model of the laser welding process and the phase transition crystallography of Fe-Mn-Si SMAs were evaluated to analyze the strengthening mechanism of the mechanical properties in the experimental materials. The results show that the distribution law for residual stress in the experiment and simulation are consistent. The experimental materials possess low residual stress, high fatigue strength and high microhardness. The strengthening mechanism for mechanical properties is the welding residual stress-induced γ→ε martensitic transformation inside the experimental materials, which causes the tensile plastic strain of the welding seam to resist residual compression strain, and the residual stress, as the transition driving force, is released in shear processing.
Highlights
Laser welding has been rapidly developed and applied in recent years as a new welding method, and it possesses high energy density, fast heating and cooling speeds, a narrow welding seam and a small heat affected zone [1,2,3,4]
To form the Fe-Mn-Si shape memory alloys (SMAs) welding seam in situ, a mixed powder of Fe, Mn, Si, Cr, Ni elements was chosen as experimental material
The strain values at each measurement point of the weldments with the 304 stainless steel welding seam and the Fe-Mn-Si SMAs welding seam were measured by the hole drilling method, and the measured values and the calculated residual stress are shown in Tables 2 and 3
Summary
Laser welding has been rapidly developed and applied in recent years as a new welding method, and it possesses high energy density, fast heating and cooling speeds, a narrow welding seam and a small heat affected zone [1,2,3,4]. This technology effectively reduces intermetallic compounds inside the weldment, and appropriately heats local micro-regions. The metal will produce plasma by evaporation and ionization, reducing the welding stability
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
