Abstract
Since the mix design of self-consolidating concrete (SCC) differs from that of conventional concrete, mechanical properties of SCC may differ from those of vibrated concrete. An experimental program was performed to evaluate mechanical properties of SCC used for precast, prestressed applications. Sixteen SCC mixtures with a fixed slump flow of 680 ± 20 mm were prepared with different mixture parameters, including binder content and binder type, w/cm, dosage of viscosity-modifying admixture, and sand-to-total aggregate volume ratio. Two high-performance concrete mixtures that represent typically concrete used for precast, prestressed applications were investigated for the control mixtures. They were proportioned with 0.34 and 0.38 w/cm and had slump values of 150 mm. Mechanical properties of SCC were compared to code provisions to estimate compressive strength, elastic modulus, and flexural strength. The modified ACI 209-90 and CEB-FIP MC90 codes are found to provide good estimate for compressive strength prediction. The AASHTO 2007 model can provide good prediction of the elastic modulus and flexural strength of SCC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.