Abstract
PurposeThe purpose of this article covers the design and manufacture of porous materials that can be used in different engineering applications by additive manufacturing.Design/methodology/approachThe most important design parameters of the porous materials are the cell structure and wall thickness. These two design criteria are difficult to control in porous materials produced by conventional production methods. In the study, two different wall thicknesses and four different pore diameters of the porous structure were determined as design parameters.FindingsA compression test was applied to the produced samples. Also, the densities of the produced samples were compared. As a result of the study, changes in mechanical properties were observed according to the cell wall thickness and pore size.Originality/valueThe originality of the study is that, unlike traditional porous structure production, the pore structure and cell wall thicknesses can be produced in desired dimensions. In addition, a closed pore structure was tried to be produced in the study. Studies in the literature generally have a tube-type pore structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Multidiscipline Modeling in Materials and Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
