Abstract
The mechanical properties of black thin film on glass substrates and metallic, obtained from the synthesis of organic-inorganic silica hybrids via sol-gel are described. Hybrid silica-based coatings with tetraethoxysilane (TEOS), methyltrietoxysilane (MTES), polyurethane (PU) and commercial silica colloidal solution (Ludox HS30) as precursors, were used. The procedure is divided in the following three steps: 1) obtaining homogenous and stable solutions of different organic silica-polymer composition, 2) aggregation of the black pigment with the formulate FeMnOx, 3) Coating substrates by both dip-coating and aerograph airbrush, at room temperature. The films obtained were characterized by SEM, AFM and nano-indentation. The coatings of the Ludox-MTES-PU/FeMnOx system showed the better characteristics concerning the morphology and the adhesion to the glass and metallic copper substrates
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.