Abstract
In this study, polyurethane grouting materials (PUG) were prepared using two different types of polyol which were castor-based polyol (CPUG) and petrochemical-based polyol (PPUG). Four different ratios of polyol (OH) to isocyanate (NCO) were used in this study. The effect of different compositions of Isocyanate on mechanical properties were investigated and compared. The flexural strength, and compression strength shows the increment with the increase of the NCO composition. Optimum flexural strength, flexural modulus, and compression strength obtained at composition of PPUG4 and CPUG4 with the ratio of NCO: OH, 2.6: 1. PPUG gives a higher value of mechanical strength as compared to CPUG, however, results obtained for both types of polyurethane are in the range of industrial PU grouting properties grade. The decrease in cell wall of CPUG and PPUG with the increase of NCO:OH indicating the increment in cell wall interaction resulting higher mechanical properties of PUG.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
