Abstract
Objectives. The study evaluated the mechanical properties under static and cyclic loading conditions of various types of glass ionomers used for bases and core build-ups under restorations. Methods. Compressive strength and three-point flexural strength of two different glass ionomers and two metal-reinforced glass ionomers were determined 1 d after the start of mixing. The flexural fatigue resistance of these materials was measured in the load range of 650 g to 1050 g using a three-point bending mechine, and fractured surfaces of the specimens were examined using SEM. Results. All the glass ionomers exhibited similar compressive and flexural strengths. The results analyzed by Cox's proportional hazard model demonstrated that the admixed-type metal-reinforced glass ionomer had the highest fatigue resistance, while the water-hardening glass ionomer had the lowest fatigue resistance among the materials examined (p<0.05). Significance. There was no significant improvement in the static mechanical properties from incorporating metal particles into the glass ionomers. However, the addition of metal particles as in the admixed-type metal-reinforced glass ionomer produced a material with increased fatigue resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
