Abstract
Abstract Twelve different porous implant compacts were fabricated by electro-discharge-sintering (EDS) of atomized spherical Ti–6Al–4V powders using single pulses of 0.75–2.0 kJ/0.7 g-powder, from 150, 300, and 450 μF capacitors. The solid core formed in the center of the compact after discharge was composed of acicular α + β Widmanstatten grains and the porous layer consisted of particles connected in three dimensions by necks. The hardness value at the solid core was much higher than that at the particle interface or at particles in the porous layer. This can be attributed to both heat treatment and work hardening effects induced from the EDS. The compressive yield strength was in a range of 19–436 MPa and significantly depended on both input energy and capacitance. Selected porous-surfaced Ti–6Al–4V implant compacts with a solid core have much higher compressive strengths compared to human teeth and sintered implants.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
