Abstract
In the realm of civil engineering, ultra-high-performance concrete-filled steel tube composite columns (UCFSTCs) constitute a new type of building material and structure, exhibiting high compressive strength and commendable durability. Given their promising characteristics, the prospects of their application are highly promising and are worthy of further exploration. However, current research has primarily focused on scaled-down specimens, thereby limiting a broader understanding of UCFSTCs' full-scale mechanical properties in real-world scenarios. This study aimed to investigate the mechanical properties of full-scale UHPC-filled steel tube composite columns (FUCFSTCs) in practical engineering applications. With the steel tube strength, steel tube thickness, concrete strength, aspect ratio, and steel tube diameter used as design parameters and the finite element software ABAQUS as the analytical tool, a total of 21 FUCFSTCs were designed and analyzed. Through a comparison with experimental curves, the rationality of both the material constitutive model and finite element model was verified, and the maximum error was 6.54%. Furthermore, this study analyzed the influence of different design parameters on FUCFSTCs' ultimate bearing capacity, ductility coefficient, and the stress-strain relationship of their concrete. The ductility coefficient remained around 1.3, and the cross-sectional size had the greatest impact on the bearing capacity of the composite column, with a maximum increase of 145.90%. Additionally, this paper provides an in-depth analysis of FUCFSTCs' mechanical behavior, failure mode, and stress process under an axial load. In conclusion, this research proposes an axial compression limit bearing capacity formula for FUCFSTCs via statistical regression, with a maximum error of 3.04%, meeting engineering accuracy requirements. Consequently, this study lays a strong foundation for the future application of FUCFSTCs in practical engineering.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.