Abstract
The mechanical properties of alkali-activated slag fiber composites (ASFC) were investigated with varying volume fractions of PVA (Polyvinyl alcohol) fibers. Ground granulated blast furnace slag (GGBS) and alkali-activators were used as the main binders instead of cement, which emits a large amount of carbon dioxide during the manufacturing process. The measured slump flow of ASFC showed a high fluidity at a fiber content of 1.5 vol.% or less. The tensile, flexural, and shear strength of ASFC showed higher values as the amount of fiber increased. Compared to the existing high ductility fiber composites showing strain hardening behaviors with a fiber content of 2.0 vol.%, ASFC proved that it could exhibit high ductility characteristics due to multi-microcracks even at low fiber mixing rates of 1.0% and 1.25%. ASFC could be expected to lower the manufacturing cost with a low fiber content and provide improved workability with high fluidity. In addition, when manufacturing structural components using the developed ASFC, it is expected that the amount of fiber could be selected and used according to the required performance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
