Year-end Sale % OFF 
Abstract
The present work deals with testing of mechanical properties of Al 87 Ni 7 Nd 6 and Al 88 Fe 9 Nd 3 alloys rapidly quenched in the form of ribbons, having completely and partially amorphous microstructure respectively. Al 87 Ni 7 Nd 6 Amorphous alloys show three transformation events the first of which involves the formation of Al nanocrystals dispersed in the amorphous phase. The micro-hardness of samples annealed at different devitrification stages was determined. An increment in hardness from 250 HVN (as quenched samples) to 355 HVN (nanocrystalline samples) was observed. The amorphous samples were cold-rolled up to 10% elongation without formation of cracks. Shear bands were evident on the outer surface. Al 88 Fe 9 Nd 3 nanocrystalline samples were cold-rolled up to 2% of elongation but cracks were detected. Tensile fracture surfaces showed dimples with diameter of the order of a hundred nanometers and no vein patterns are observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
