Abstract
The aim of current investigation is to find out the effects of filler material composition on the welding properties of Stainless Steel (SS) 304 welded with Semi-Automatic TIG welding process. For this reason 6 mm thick plates were utilized with Single V-Butt joints. Then, Surface roughness, Tensile Strength, Hardness, and EDAX/ SEM investigation of joints were used and assessed with various filler materials like ER 308L, 316L and 310. The filler materials ER 316L and 310 demonstrated lesser properties as compared with ER 308L. From SEM/EDAX investigation it was observed that the joints made with the filler material ER 310, ER 316L and ER 308L possessed high alloying components. Further, it was observed that high alloying components were obtained in the joints which were made with the filler material ER 316L.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.