Abstract
Natural fibers are promising bio-based materials to use as reinforcements in polymer composites as often more affordable and accessible alternatives to fossil-based fibers, especially because of their superior sustainability. Polyoxymethylene (POM) is a widely used engineering thermoplastic, which has a melting temperature suitable for processing with natural fibers. In this study, such composites consisting of POM and regenerated cellulose fibers have been developed and studied in terms of their mechanical, thermal, tribological and structural properties. Tensile and flexural moduli increased with incorporation of 30 wt% fibers up to 89% and 79% respectively, crystallinity increased as well by a maximum of approx. 11% at 30% fiber content. Furthermore, the specific wear rate was improved for the composite with 10 wt% fibers, showing a decrease of roughly 80%. This study investigates the processing parameters and tribo-mechanical performance of POM-based natural fiber composites as an important route towards future sustainable polymer composites in load bearing applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.