Mechanical properties and microstructure of ultra-high-performance concrete with high elastic modulus

Abstract

Elastic modulus is an important parameter in engineering structural design for evaluating the stiffness of concrete members. Ultra-high-performance concrete (UHPC) has excellent mechanical properties and durability, but the relatively low elastic modulus prohibits the widespread use of the UHPC. In this study, high elastic modulus UHPC (HEMUHPC) was designed according to Modified Andreasen and Andersen particle packing model proposed by Funk and Dinger. Effects of alumina micro-powder (the content of alumina is higher than 99%, and the particle size is lower than 100 μm) on the workability, microstructure, and mechanical properties of HEMUHPC were systematically investigated. The reason for the improvement of elastic modulus of HEMUHPC was revealed by nano indentation test. It was found that, 1) the porosity and threshold pore diameter of HEMUHPC were reduced because of the addition of alumina micro-powder; 2) the flexural strength, compressive strength, and elastic modulus of HEMUHPC were increased by 3.54–11.23%, 8.89–22.83%, and 6.19–16.37%, respectively, due to the addition of alumina micro-powder; 3) the optimal content of alumina micro-powder was 10%, considering its effects on the workability, mechanical properties, and microstructure of HEMUHPC; 4) Nano indentation experiments showed that the elastic modulus of the alumina micro-powder was 90–135 GPa, which is much higher than the elastic modulus of hydration products of HEMUHPC, and thus the elastic modulus of the HEMUHPC matrix could be improved, due to the addition of alumina micro-powder.